JEFF ROWLAND CONTINUUM S2 - Specifications

SPECIFICATIONS
Output Power
400 watts @ 8 ohms/ 800 watts @ 4 ohms
Frequency Response
5 Hz – 70 kHz, -3 dB @ 8 ohms
Input Impedance
40k ohms
Intermodulation Distortion (CCIF)
0.0008%, 18/19 kHz, 10 watts, 8 ohms
Output Noise
< 75 µv, 20 Hz – 20 kHz, unweighted
Crosstalk
> 91 dB @ 1 kHz, 74 dB @ 20 kHz
THD + Noise
0.004% @ 1 kHz, 8 ohms
Damping Factor
> 1000
Overall Gain / Bal. or Unbal.
26 dB, volume control set to 85.5
Common Mode Rejection Ratio
> 90 dB, 20 Hz – 20 kHz
Absolute Phase Non-inverting
Pin 2 Positive
Inputs
2 pair balanced (XLR), 2 pair unbalanced (RCA)
1 pair unbalanced bypass (RCA)
Outputs
1 pair balanced (XLR), 1 pair unbalanced (RCA)
Integrated Amplifier Weight
35 lb / 15.9 kg
Integrated Amplifier Dimensions
(h/w/d)
5.3” x 15.5” x 15.0” / 135mm x 394mm x 380mm
REVA1.9 - CONTINUUM S2 INTEGRATED AMPLIFIER

PAGE 20