JEFF ROWLAND CONTINUUM S2 User Manual

(8) BAL L: This button will shift the output of the integrated amplier towards the left
channel. Each press of the button will increase the output of left channel by 0.5 dB and
decrease the level of the right channel by 0.5 dB. A total shift of 6 dB is possible. The
balance control is not continuous; holding the button down will not continue to shift the
balance. The button must be repeatedly pressed to continue to activate the balance shift
towards the left channel.
(9) BAL R: This button will shift the output of the integrated amplier towards the right
channel. Each press of the button will increase the output of right channel by 0.5 dB and
decrease the level of the left channel by 0.5 dB. A total shift of 6 dB is possible. The balance
control is not continuous; holding the button down will not continue to shift the balance.
The button must be repeatedly pressed to continue to activate the balance shift towards
the right channel.
BATTERY REPLACEMENT: When the remote begins to become weak or will not function, it is
likely necessary to replace the battery. The old batteries can be removed from the battery
compartment and new batteries installed. Two standard alkaline batteries, size AAA, are
required.
REVA1.9 - CONTINUUM S2 INTEGRATED AMPLIFIER

PAGE 18

JEFF ROWLAND CONTINUUM S2 Specifications

General

Brand	JEFF ROWLAND
Model	CONTINUUM S2
Category	Amplifier
Language	English