Page 9
(6) Inner door
User can observe the inside of the chamber through this transparent and made by
reinforced glass inner door. This prevent environment inside of the chamber from exposure
to outer air then polluted. turn the handle of glass door to clockwise rotation to close the
door and to the opposite way of clockwise rotation to open the door.
(7) Door Handle
It is Door handle for door opening.
(8) Magnetic Packing
Used for shock absorber and double- air tightness.
(9) Chamber
It’s made of stainless steel and there are Blower, Heater, Temp. sensor and Temp.
regulator inside of the chamber.
(10) Temperature Controller
This has a Micro processor (CPU) which has Digital PID Auto tuning function. It also has
temperature compensation function for temperature sensor and the highest class safety
level control system such as heating volume controller.
(11) Over temp. Limit.
If the heater temperature rises higher than set temperature it cut the power of the
temperature controller, makes the over temperature LED blinking and alarming beep
sounds. If you resume the operation, please set knob of it about 15% higher than set
temperature and press Start/Stop switch ones then check run led of temperature controller
is on.
(12) Inner Door packing
A silicone rubber for high temperature keeps high air sealing.
(13) Control panel
Controller and electric component are there.
To Next Page
Loading...
