Jeio tech Lab Companion SK-600

Questions and Answers

M
Mrs. Tracy MurphyAug 8, 2025
How to troubleshoot a Jeio tech Lab Companion SK-600 unit that does not turn on?
- M
  mooremelissaAug 8, 2025
  If your Jeio tech Laboratory Equipment unit isn't turning on, start by checking the ID plate on the back to ensure you have the correct power and voltage. Make sure the main power plug is correctly inserted. Check for any power failures and resolve them. If the socket, plug, or main power line is damaged, or if exchanging the fuses on the back of the unit doesn't solve the problem, request service.
W
William LopezAug 12, 2025
What to do if the circuit breaker of building(room) is often shorted with Jeio tech Lab Companion SK-600?
- R
  Robert EdwardsAug 12, 2025
  If the circuit breaker frequently shorts when using your Jeio tech Laboratory Equipment, verify the voltage supplied to the circuit breaker. Also, check if multiple similar units are being used together, which could overload the circuit. Avoid using too many units simultaneously. If the issue persists, request the service.
E
Emily DouglasAug 18, 2025
Why do the fuses keep burning out in my Jeio tech Lab Companion SK-600?
- S
  Susan MartinAug 18, 2025
  If the fuses in your Jeio tech Laboratory Equipment are frequently burning out, check the voltage and ampere of the fuses. If the main power line is cut or damaged, replace it. Ensure there is no humidity on the inserting part; if there is, clear it and reconnect. If problems persist, request the service.
T
tkingAug 22, 2025
What to do if main power turns on but switch lights off in Jeio tech Laboratory Equipment?
- M
  medinakellyAug 22, 2025
  If the main power is on but the switch lights are off on your Jeio tech Laboratory Equipment, check for a blackout. Ensure the main plug is correctly connected to the socket. If the fuses are blown, replace them with new ones. If the problem continues, request the service.
C
Christian Hendricks Jr.Aug 27, 2025
What to do if the START/STOP button does not work on Jeio tech Lab Companion SK-600?
- C
  Christine GonzalezAug 28, 2025
  If the START/STOP button on your Jeio tech Laboratory Equipment isn't working, first press the SHAKE/SET button to input the RPM setting value, then press the START/STOP button to check if it operates correctly. If the problem persists, request the service.
R
riveralisaSep 2, 2025
What to do if Jeio tech Laboratory Equipment stops without cutting main power?
- O
  Omar DuarteSep 2, 2025
  If your Jeio tech Laboratory Equipment stops controlling without any input, avoid strong noise near the unit or move the unit away from the noise source. If the problem persists, request the service.

Summary

Chapter 1: Introduction

Caution about Operating Instructions

Product Warning Marks

Safe Operation and Product Reorganization

Precautions for safe operation and prohibition of unauthorized product modification.

Chapter 2: Transportation Confirmation and Installation

Unpacking and Transportation Confirmation

Installation Guide

Chapter 3: Safety Alert and Caution

Safety Alerts and Warnings

Explanation of signal words (Alert, Notice) and symbols used to denote hazards.

Critical Safety Precautions

Outlines essential safety measures for electrical, environmental, and operational safety.

Chapter 4: Part Names and Controller Instructions

Part Identification and Functions

Control Panel Overview

Details the function of each button, display, and LED on the controller.

Operating the Shaker

Instructions for setting shaking speed and programming the timer.

Chapter 5: Switching Motion and Stroke Width

Switching Orbital;Reciprocation Motion

Step-by-step guide to change the shaker's motion type for different models.

Adjusting Stroke Width

Chapter 6: Maintenance and Troubleshooting

Regular Maintenance Schedule

Safekeeping and Cleaning Procedures

Troubleshooting Common Issues

Identifies common problems related to power, mechanical systems, and their solutions.

Jeio tech Lab Companion SK-600 Specifications

General

Controller	Digital PID Controller
Material (Interior)	Stainless Steel
Material (Exterior)	Powder Coated Steel
Power Supply	220V, 50/60Hz
Temperature Range	RT+5°C to 70°C
Temperature Accuracy	±0.5°C
Shelves	2
Timer	99 hr 59 min