Jenn-Air JA480 Assembly Procedures

JA460/JA580 ASSEMBLY PROCEDURES
Tools Required: Knife or scissors, 7/16 (11mm) wrench, 11/16” (17 mm) flat or adjustable wrench,
Phillips or #2 Robertson (square) screwdriver.
Step 1: Unpack carton
Cut the strapping on the package, then lift off the carton cap. Remove the sleeve by lifting it straight
over the top of the Barbecue. Remove and unpack the enclosed parts boxes. Remove any protective
covering from stainless steel parts.
Page 1
Box
#
1
Box
#
2
Box
#
3
(JA460)
(JA580)
Box
#
4
50001508 10/02 Rev.0
Eng

Jenn-Air JA480 Specifications

General

Burners	4
Material	Stainless Steel
Cooking Surface	Porcelain-coated cast iron grates
Burner Material	Stainless Steel
Ignition Type	Electronic
Grill Material	Stainless Steel
Fuel Type	Liquid Propane or Natural Gas
Warranty	Limited Lifetime Warranty