Jenn-Air MK27 - User Manual

NEW CUTOUT DIMENSIONS
FOR INSTALLING BUILT-INMICROWAVE
OVER A SINGLE WALL OVEN
Listed below are the cutout dimensions for installing a built-inmicrowave over a single wall
oven using the different trim kits that are available.
Please note when using trim kits MK27 and MK30 (vs. using A527 and A627), the height
cutout (Dim C) has increased slightly to 16 1/16" (from 15 3/4"). Alsotrim kit A627 is for use
with wall oven model W131 only.
S OPENING
Model Oven Size/ Dim "A" Dim "B" Dim "C"
Cabinet Size
MK24 24"/24" 22 7/8" 30 7/8" min. 15 3/4"
MK27 27"/27" 25 1/2" 28 1/2" min. 16 1/16"
MK30 30"/30" 28 3/16" 28 1/2" min. 16 1/I6"
A627 30"/33" 28 3/4" 30" min. 15 3/4"
12/7/95 JJ125T197

Summary

Built-in Microwave Over Wall Oven Cutout Dimensions

Cutout Dimensions by Model and Trim Kit

Provides specific cutout dimensions (Dim A, B, C) for various Jenn-Air microwave models and trim kits.

Installation Preparation and Steps

Cabinet or Wall Opening Requirements

Specifies required cabinet opening size, levelness, and 80 lb support for the microwave.

Trim Kit Assembly and Microwave Installation

Guides on assembling trim components and installing the microwave oven into the opening.

Electrical and Component Installation

Electrical Requirements and Grounding

Details 120-Volt, 60Hz, 15-amp supply and mandatory electrical grounding for safety.

Bottom Rail Attachment

Instructions for removing old brackets and attaching the new bottom rail for the microwave.

Jenn-Air MK27 Specifications

General

Fuel Type	Electric
Self-Cleaning	Yes
Interior Light	Yes
Precision Cooking System	Yes
Temperature Probe	Yes
Broiler	Yes
Warming Drawer	No
Installation	Built-In
Color	Stainless Steel
Oven Features	Convection
Control Type	Electronic
Number of Racks	2