27
6 Configuration Motor Type Jenny Science /
Motor customer specific
The XENAX® Servo Controller differentiates between
Jenny Science Motors LINAX® Lx, ELAX® Ex or ROTAX®
Rx, and motors from other manufacturers.
The XENAX® Servocontroller recognises if the
connected motor is a Jenny Science motor (LINAX® Lx,
ELAX® Ex or ROTAX® Rx ) or a motor from another
manufacturer (typically a rotative servo motor) and
configures the required settings.
If this automatic detection is not desired, the settings
can be fixed to either Jenny Science Motor
(command: MM1) or third party motor
(command: MM2). AutoDetection (MM0) is switched
on by default.
To Next Page
Loading...