Jenny Science XENAX Xvi 75V8S - ASCII Protocol; ASCII Protocol over TCP;IP; Asynchronous Messages and Events

9
1.4 Xvi 75V8 versus Xvi 75V8S
The XENAX® Xvi 75V8S is the evolution of the current model XENAX® Xvi 75V8. The new model supports all the
previous functionalities of the Xvi 75V8, has the same dimensions and can therefore be replaced 1:1. For new
developments we recommend to use the Xvi 78V8S. It doesn't need JAVA and offers additional possibilities.
New possibilities Xvi 75V8S
Note:
When replacing an Xvi 75V8 with the Xvi 75V8S in an existing bus system, please note that the product-code is
different. The corresponding development environment is required so that the new bus device can be integrated
correctly. You will find instructions for this in the manual of the bus module used on our website.
https://www.jennyscience.ch/en/products/download
Xvi 75V8
Xvi 75V8S
Webserver base for WebMotion®
Java
HTML5
Option for measuring amplifier Signateq® with external force
sensor, precise force measurement
-
Yes
Position accuracy absolute ROTAX® Rxhq
Standard
High
(with correction table)
Optimized output stage for minimal space requirement
(Heat emission), can be installed directly next to each other
-
Yes
Switching for connection of third-party motors
DIP-Switch
automatic
Position detection prepared for absolute encoder
-
Yes
USB-Interface
-
Yes
RS232-Interface
Yes
optional
Pulse/Direction
Yes
optional
Electronic gear
Yes
optional
Case
Aluminium
Chrome steel
Weight
515g
840g
UL-certified version
Yes
-
Product-code
0x7508
0x7509