Jenny Science XENAX Xvi 75V8S

85
10.19 Basic Settings
General basic settings
MODE
Choose mode:
Standard
0
Electronic Gear
1
Stepper Control
2
Coded Prog No (standard)
10
Coded Prog No (stepper control)
12
INC PER PULSE
Inc. pro Pulse, MODE 2, Puls/Direction controlling.
SYNC RATIO
Ratio of electronic gear
CARD IDENTIFIER
Master/Slave, CANopen, Powerlink
Read form start-up key (2 x binary coded switch)
or set manual if there is no start-up key.
IP ADDRESS
Ethernet TCP/IP Adresse
SUBNET MASK
Ethernet TCP/IP Subnetmask