POWER
Amplifiers
Ground
Terminal (GND)
Make the ground lead as short as possible, leaving enough length to complete
the installation and to allow for any service that may be needed
at
a later date.
To
ensure a good ground, scrape away any paint or undercoating to expose
bare metal. Use a "ring"
terminal
of
the proper gauge and an "outside star
washer" (between the chassis and ring terminal) when making your ground
connection. Although you've scraped away the paint to expose bare metal, the
outside star washer will help to
"bite into"
the chassis for a tight, secure
ground.
-
PO
WER
INPU
T
-
+12V
RE
M G
ND
T
Drill
hole
in chassis
sheet
metal.
Replacement Fuse Requirements (FUSE)
Model
Quantity
Amps
Type
2000.10
3
35
ATO
(
,
,.9~>
5
To Next Page
Loading...
