Need help?Do you have a question about the Jensen 541 and is the answer not in the manual?
General| Brand | Jensen |
|---|---|
| Model | 541 |
| Category | Automobile |
| Language | English |
Diagram illustrating the various instruments and controls of the Jensen 541 car.
Monitoring oil pressure readings for correct engine lubrication system operation.
Lubricating the rear axle and recommended oil types for Hypoid Bevel axle.
Gearbox lubrication and oil capacity, including details for overdrive fitted vehicles.
Procedure for cleaning and resetting sparking plugs and checking carburetters.
Detailed chart outlining lubrication points and intervals for the car's components.
Details on the 12-volt battery type, location, and essential maintenance precautions.
Procedure for adjusting rear brake shoes for optimal clearance and performance.
Steps for bleeding air from the hydraulic brake system to ensure proper function.
Importance and procedure for aligning front wheels for tyre life and steering.
Guidance on adjusting front wheel bearings for play and correct clearance.
Correct tyre pressures for normal and high-speed driving conditions.
Details on the clutch type, its friction area, and clearance adjustment.
Information on gearbox speeds, ratios, oil capacity, and overdrive.
Information about the AC mechanical fuel pump and maintenance of the strainer gauze.
Troubleshooting and adjusting carburetter pistons for smooth engine running.
Adjusting carburetters for correct idling speed and mixture settings.
Steps for resetting ignition timing using distributor, points, and micrometer.
Details on engine oil pressure lubrication system, feeds, and capacity.
Information on the cooling system, centrifugal pump, thermostat, and pressurisation.
Common causes and checks for engine misfiring problems.
Troubleshooting steps when the engine starts and then immediately stops.
Causes and checks for reduced engine power output.
Identifying causes of engine knocking, such as timing, carbon, or bearings.
To Next Page