Jensen CAR70V - Installation Preparation; Pre-Installation Steps and Guidelines; Mounting and Trim Ring Installation

5
CAR70V PREPARATION
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it
would be subject to dust, dirt or excessive vibration.
Preparation
* Use 2 or 3 screws to affix the monitor to the bracket.
MO UNTING SC REWS
M5.0x6.0mm M5.0x5.0mm
TR IM RING