Jensen JTV4023DCS - System and Support; Setting Time; Using the Timer; Notification

24
System and Support
Setting Time
> Settings > System > Time Settings
Set the current time based on your location.
• Time Zone
Select your time zone.
• Time Format
Set the time to display in a 12 or 24-hour format.
• Date Format
Set the time to display in a mm-dd-yyyy, dd-mm-yyyy or yyyy-mm-dd format.
• Daylight Savings
Select whether to apply Daylight Savings Time to the TV.
• Date and Time
Set the Date and Time. You can set the date and time to automatically sync with Internet/
broadcast or manual setup by yourself.
Using the timer
> Settings > System > Timers
Adjust the timer settings to suit your preference.
• Sleep Timer
Set the sleep timer to automatically turn the TV O󰀨 within a specied time: O󰀨, 10 Minutes,
20Minutes, 30 Minutes, 40 Minutes, 50 Minutes, 60 Minutes, 90 Minutes and 120 Minutes.
• Power On Timer
Set the clock for the time you want the TV to turn on automatically. You can set the time
only once
or set the time in specied date weekly.
• Power O󰀨 Timer
Set the clock for the time you want the TV to turn o󰀨 automatically. You can set the time
only once
or set the time in specied date weekly.
• Menu Timeout
Set the amount of time that you would like for the menu to display: 10s, 20s, 30s, 60s, 90s, O󰀨 .
Notication
> Settings > System > Advanced Settings > Notications Pop-ups
Allow pop-up notications to appear for useful information and events that occur with your TV,
including: Advertising, New Arrivals, Warnings And Legal Statements and System message.
You can enable/disable each of these notications.
> Notications
You can view the list of event messages generated by the TV.
Note:
System and Support
• To delete all notications, select Clear All.