9
JWM45
Reset
HDMI ARC
The reset button should be activated for the following reasons:
Use a ball point pen or similar object to press the RESET button (21). This may
be necessary should the unit display an error code.
Connect HDMI cable to JENSEN TV with ARC function and JWM45 radio head
unit. If the set up and operation is correct, the TV audio will come out from the
speaker of the head unit after switching to HDMI ARC mode.
Ÿ Initial installation of the unit when all wiring is completed.
Ÿ Function buttons do not operate.
Ÿ Error symbol on the display.
To Next Page
Loading...
