Do you have a question about the Jensen AWM970 and is the answer not in the manual?
power supply requirements | DC 12 Volts, Negative Ground |
---|---|
operating voltage | 10-16VDC |
tuning range | 87.5-107.9FM |
---|---|
sensitivity | <2.5uV |
stereo separation at 1 kHz | >30dB |
tuning range | 530-1710 |
---|---|
sensitivity | <15uV |
output power | 108 Watts Total (18 Watts per Channel) |
---|---|
output impedance | Compatible with 4-8 Ohm Speakers, 4 Ohm Load Minimum |
frequency response | 20-20, 000 Hz |
---|---|
channel separation | 50dB |
signal-to-noise ratio | 70dB |
distortion | 0.2% |
overall dimensions | 265mm(W)x178mm(H)x159mm(D) |
---|---|
mounting dimensions | 235mm(W)x154mm(H)x133mm(D) |
weight | 5.5 lbs |
Guidance on choosing a suitable place to mount the unit, avoiding heat sources and ensuring proper ventilation.
Instructions for measuring and cutting the mounting hole for the unit, ensuring clearance behind the panel.
Operating the power, volume, and mute/loudness functions for audio adjustment.
Procedures for setting the clock, sleep timer, and alarm functions.
Covers selecting bands, manual/seek tuning, preset stations, and automatic station storing.
Programmed playback, language, subtitle, angle, zoom, and menu navigation.
Connecting, switching to iPod mode, and managing power.
Setting OSD, audio, subtitle, and menu languages.