Jensen AWM970 User Manual

AWM970
16
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
AUTO
NTSC
PAL
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
ENGLISH
CHINESE
GERMAN
SPANISH
FRENCH
RUSSIAN
AUDIO SETUP
AUDIO OUT
KEY
SPDIF/OFF
SPDIF/RAW
SPDIF/PCM
Setup Menu
Press the (setup) button (11) on the remote control to access the SETUP menu and adjust
system settings for the following categories:
• System Setup
• Language Setup
• Audio Setup
• Video Setup
• Digital Setup
While in the setup menus, use your directional arrows to select and change settings. The “up”
and “down” arrows highlight the options, and the “right” and “left” arrows will change the setting
for the highlighted option.
System Setup
The System Setup menu controls the
following features:
TV SYSTEM
: This item is used to select a TV signal system to match your TV set. Select one
of the following options: AUTO, NTSC or PAL.
SCREEN SAVER
: Turn Screen Saver feature On/Off.
TV TYPE
: Select one of the following picture formats: 4:3PS, 4:3 LB or 16:9. 4:3 is a letterbox
selection, and 16:9 is wide screen.
PASSWORD
: This item allows the selection of a new four-digit code to use for security
purposes.
RATING
: Select the parental control level for all DVD play. The security password is required to
make changes to this feature.
DEFAULT
: Use this item to restore default settings at any time.
Language Setup
The Language Setup menu controls the
following features:
On-Screen Display (OSD) Language
: Set the OSD language to one of the following: English,
Chinese, German, Spanish, French, or Russian.
Audio Language
: Set the audio language to one of the following: Chinese, English, Japan,
French, Spanish, Russian, Latin or German.
Subtitle Language
: Set the subtitle language to one of the following: Chinese, English, Japan,
French, Spanish, Russian, German or OFF.
Menu Language
: Set the menu language to one of the following: Chinese, English, Japan,
French, Spanish, Russian, German or Latin.
Audio Setup
The Audio Setup menu controls the
following features:
Audio Out
: This item defines the digital output format.
Key: This item changes the audio output key.

Jensen AWM970 Specifications

Power

power supply requirements	DC 12 Volts, Negative Ground
operating voltage	10-16VDC

FM Tuner

tuning range	87.5-107.9FM
sensitivity	<2.5uV
stereo separation at 1 kHz	>30dB

AM Tuner

tuning range	530-1710
sensitivity	<15uV

Amplifier

output power	108 Watts Total (18 Watts per Channel)
output impedance	Compatible with 4-8 Ohm Speakers, 4 Ohm Load Minimum

DVD

frequency response	20-20, 000 Hz
channel separation	50dB
signal-to-noise ratio	70dB
distortion	0.2%

Weight and Dimensions

overall dimensions	265mm(W)x178mm(H)x159mm(D)
mounting dimensions	235mm(W)x154mm(H)x133mm(D)
weight	5.5 lbs