Do you have a question about the Jensen JXP720 and is the answer not in the manual?
Gather necessary tools, supplies, and adapters before beginning the installation process.
Details on connecting the power (+12V), ground (GND), and remote (REM) terminals to the vehicle.
Specifies the correct fuse types and ratings for each amplifier model (JXP720, JXP460, JXP340).
Explains how to connect low-level (RCA) or high-level inputs; advises against using both simultaneously.
Illustrates wiring configurations for two speakers and two subwoofers, specifying minimum impedance.
Explains tri-mode operation for driving front speakers and subwoofers, requiring passive crossovers.
Addresses issues where the amplifier does not turn on or operate, checking power and fuses.
Troubleshoots issues like low volume, distorted sound, or sound from only one speaker.
Diagnoses problems related to the protect light, thermal shutdown, and engine noise interference.