EasyManua.ls Logo

Jensen POWER 5500 Amplifier - User Manual

Jensen POWER 5500 Amplifier
23 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
POWER 5500 Amplifier
Installation & Operation
Manual
Amplificador Power 5500
Manual de Instalación y
Operación
Amplificateur Power 5500
Manual de Installation et
Operation
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features and Specifications . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Power Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Speaker Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Input Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Indicators and Controls . . . . . . . . . . . . . . . . . . . 8
Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Remote Input Level Control . . . . . . . . . . . . . . . 10
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 11
Contenido
Introducción . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Características y Especificaciones . . . . . . . . .14
Instalación. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Cableado de Energía . . . . . . . . . . . . . . . . . . . . .16
Cableado de Parlantes. . . . . . . . . . . . . . . . . . . .17
Cableado de Entrada . . . . . . . . . . . . . . . . . . . . .18
Controles e Indicadores . . . . . . . . . . . . . . . . . .20
Prueba . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Control de Nivel de Entrada Remoto . . . . . . . .22
Resolución de Problemas . . . . . . . . . . . . . . . . .23
Table des matières
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Caractéristiques et Spécifications. . . . . . . . . . 26
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Câblage de puissance. . . . . . . . . . . . . . . . . . . . 28
Câblage du haut parleur . . . . . . . . . . . . . . . . . . 29
Câblage d’entrée . . . . . . . . . . . . . . . . . . . . . . . . 30
Indications et commandes . . . . . . . . . . . . . . . . 32
Essais . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Commande niveau d’entrée à distance. . . . . . 34
Dépannage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Table of Contents

Questions and Answers

  • M
    Martin JohnsonJul 31, 2025
    What to do if Jensen Car Amplifier does not turn on?
    • G
      glennkeithJul 31, 2025
      If your Jensen Car Amplifier is not turning on, several factors could be at play. First, check the fuse(s) for the +12V terminal. Also, verify the head unit fuse(s) and wiring for the REM terminal. A blown main fuse at the battery or at the amplifier itself could also be the culprit; replace the fuse and identify what caused it to fail. Finally, ensure the main power ground is properly re-grounded to a bare metal chassis.
  • A
    Ashley SmithAug 5, 2025
    What to do if Jensen Car Amplifier blows fuses?
    • O
      Olivia WilsonAug 5, 2025
      If your Jensen Car Amplifier blows fuse(s), it might be due to power wires connected backwards; make sure to reconnect them properly. Alternatively, there may be an internal problem with the amplifier, requiring professional service.
  • M
    mkingAug 10, 2025
    Why is my Jensen Car Amplifier making engine noise?
    • S
      Sarah GonzalesAug 10, 2025
      If you are experiencing engine noise or alternator whine with your Jensen Car Amplifier, it could be due to several reasons. Try using good quality shielded RCA cables to eliminate ground loops. Ensure the amplifier and head unit are properly grounded to a clean, bare metal chassis. Re-route RCA and/or speaker wires away from factory harnesses to address inductive coupling. Also, check if the input level on the amplifier is set too high and readjust it.
  • J
    John ClarkAug 15, 2025
    Why does my Jensen Car Amplifier have distorted sound?
    • K
      Kenneth AdamsAug 15, 2025
      If the sound from your Jensen Car Amplifier is distorted, it might be because the input level control is adjusted too high. Try readjusting the input level.
  • J
    jared15Aug 19, 2025
    What to do if thermal protection activated on Jensen Car Amplifier?
    • A
      Ann BurgessAug 19, 2025
      If the thermal protection is activated on your Jensen Car Amplifier, it might be because the amplifier is driving a 2 ohm load (4 ohms bridged) for extended periods. If the amplifier frequently overheats while driving subwoofers, consider installing a fan to keep it cool.
  • J
    Joanne WalkerAug 25, 2025
    Why is the volume control too sensitive on my Jensen Car Amplifier?
    • K
      Katie JacksonAug 25, 2025
      If the volume control on your Jensen Car Amplifier is too sensitive, it is possible that the input level control is adjusted too high. Try readjusting the input level.

Summary

Introduction

Before You Begin

Safety precautions and preparation before installation.

Features and Specifications

Power Output

Details the amplifier's power output ratings for different channel configurations.

Installation

Disconnect Battery

Critical safety step to disconnect the vehicle's negative battery cable.

Location and Mounting

Guidelines for selecting a suitable and secure mounting location.

Routing Wires

Instructions on properly routing wires for connections and safety.

Power Wiring

Charging System

Discusses vehicle electrical system and potential upgrades for the amplifier.

Power Terminal (+12 V;B+)

Ground Terminal (GND)

Replacement Fuse Requirements (FUSE)

Speaker Wiring

Two Speakers and Two Subwoofers

Four Speakers and Subwoofer

Two Speakers and Subwoofer

Input Wiring

5 Channel Input Configuration

Bridged Mode Input Configuration

Indicators and Controls

Protect Indicator (PROTECT)

Visual indication of a problem; system shuts down.

Input Level Control (LEVEL)

Bass EQ

Sub Sonic Filter

Testing

Reconnect Battery

Test Power Wiring

Verifies amplifier power light and speaker operation after installation.

Test Speaker Connections

Troubleshooting

Internal Problem Diagnosis

Diagnosing internal amplifier issues when protection is active without speakers.

Jensen POWER 5500 Amplifier Specifications

General IconGeneral
BrandJensen
ModelPOWER 5500 Amplifier
CategoryCar Amplifier
LanguageEnglish

Related product manuals