Jensen VX3012 Installation & Quick Start Guide

Voxx Electronics Corporation
Hauppauge, NY 11788
Technical Assistance: 800-323-4815
www.jensenmobile.com © 2015 Printed in China
QUICK START GUIDE
Turning the Unit ON or OFF
Press the front panel Power/Menu button [ / SRC ] to turn the unit ON. To turn the unit OFF, press and hold the front panel
Power/Menu button [ / SRC ] for 2 seconds.
Selecting an Audio/Video Source, BT or Backup Camera
To access an Audio/Video source:
1. Momentarily press the front panel Power/Menu button or touch the Menu
icon located in the upper left corner of the display to view the Main Menu Screen.
2. Touch the desired source icon on one of the two main menu screens. Screen 1 of 2: Radio, Disc, BT, USB.
Touch page arrow (-->) at the bottom of the screen to access Screen 2 of 2: BT (Audio), Steering Wheel Control
(SWC), AV-IN1, AV-IN2, or Camera.
Screen 1 Screen 2
MENU
Button
Volume Adjustment
Volume Increase/Decrease
To increase or decrease the volume level
, turn the rotary encoder on the front panel. When the volume level
reaches "0" or "50", a beep sounds, indicating that the adjustment limit has been reached. The TFT screen displays
the volume level for 3 seconds.
Mute
Press the volume knob on the front panel or press the [MUTE] Button on the remote control to mute the volume
from the unit.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The beep tone can
be disabled through the Setup menu.

Jensen VX3012 Specifications

General

Receiver type	-
Audio output channels	- channels
Power output per channel (20-20KHz@8 Ohm)	- W
USB ports quantity	1
Connectivity technology	Wired & Wireless
Bluetooth	Yes
Optical drive type	DVD player
Display	TFT
Product color	Black
Handheld remote control	No

Weight and Dimensions

Width	- mm