Need help?Do you have a question about the jenway 6305 and is the answer not in the manual?
Guidelines for placing the unit, connecting power, and initial power-on procedures for the spectrophotometer.
Procedure for selecting and performing % Transmittance measurements, including calibration steps.
Procedure for selecting and performing Absorbance measurements, including calibration steps.
Steps for calibrating the instrument using a standard of known concentration to determine a factor.
Table listing common error codes, their meanings, and potential causes for the 6305 spectrophotometer.
Contact information and methods for obtaining technical assistance and application advice from Jenway.
General| Display | LCD |
|---|---|
| Detector | Silicon Photodiode |
| Light Source | Tungsten Halogen |
| Sample Holder | 10mm pathlength cuvettes |
| Data Output | RS232 |
| Accuracy | ±0.002 Abs at 1.0 Abs |
| Type | Visible Spectrophotometer |
To Next Page
