Need help?Do you have a question about the jenway 6405 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Data Output | RS232 |
| Detector | Silicon Photodiode |
| pH Resolution | 0.01pH |
| mV Resolution | 1mV |
| Temperature Resolution | 0.1°C |
| Type | UV/Vis Spectrophotometer |
| Light Source | Tungsten Halogen & Deuterium |
| Power Supply | 100-240 V, 50/60 Hz |
| mV Range | -1999 to 1999 mV |
| mV Accuracy | ±1 mV |
| Temperature Accuracy | ±0.5 °C |
| Photometric Range | -0.3-3.0 Abs |
Details the features, modes, and overall capabilities of the 6400/6405 spectrophotometer.
Lists the technical specifications, including ranges, accuracy, and performance metrics.
Guides on unpacking the instrument and checking the package contents.
Covers electrical requirements, fuse ratings, and safe mains connections.
Explains the function of buttons, display indicators, and operational icons.
Details the physical ports and connectors on the rear of the instrument.
Introduces the instrument's modes of operation and power-on system tests.
Describes configuration settings like language, clock, and display adjustments.
Explains basic transmittance, absorbance, and concentration measurements.
Covers wavelength scanning, baseline acquisition, and spectral data analysis.
Details how to perform and analyze time-based kinetic measurements.
Explains the process of creating and using calibration curves for concentration.
Provides recommendations for optimal performance and reliable results.
Basic instructions for keeping the instrument clean and in good condition.
Step-by-step guide for safely replacing the tungsten halogen lamp.
Procedure for safely replacing the deuterium lamp on the 6405 model.
Lists optional accessories that can enhance instrument functionality.
Lists essential spare parts like lamps and consumables.
Details the RS232 interface settings and communication parameters.
Describes the physical pinout for RS232 connections to a PC.
Explains the analog output signals proportional to measured values.
Lists warnings and errors detected during the instrument's startup self-test.
Details common error messages encountered in Photometrics, Spectrum, Kinetics modes.
Lists error messages specific to the Photometrics measurement mode.
Lists error messages specific to the Spectrum scanning mode.
Lists error messages specific to the Kinetics measurement mode.
Lists error messages specific to the Quantitation mode.
Lists error messages that may occur with connected accessories.
Shows an example of the printout format for Photometrics measurements.
Illustrates the printout format for spectral scan data.
Shows an example printout for measurements at two wavelengths.
Illustrates the printout format for kinetic measurement results.
Shows an example printout for quantitation calibration and measurement.
To Next Page
