What should I do if my jenway 7305 Measuring Instruments show Err 4 Microswitch Failure?
If your Jenway Measuring Instruments display 'Err 4 - Microswitch Failure', it indicates that the microswitch is broken. Contact a service technician.
General| Brand | jenway |
|---|---|
| Model | 7305 |
| Category | Measuring Instruments |
| Language | English |
Overview of the Jenway 7300 and 7305 spectrophotometers and their capabilities.
Detailed technical specifications for both the 7300 and 7305 models.
Step-by-step guide for setting up the spectrophotometer for operation.
Procedure for calibrating the instrument for Photometrics measurements.
Performing sample measurements in Photometrics mode.
Procedures for calibrating using a standard or a factor.
Performing sample measurements in Concentration mode.
Instructions for operating specific accessories like the 8 cell turret and Peltier.
Contact information and procedures for service and repair.
Explanation of error codes, their causes, and solutions.
Common issues and their recommended solutions.
To Next Page
