8. Roll
Roll the deck forward until it is in the lull forward position and under the
hold downs.
8._••_
~;
9. Secure Load .
Securely fasten the load to be transported with safety tie downs to
keyslots provided in rear of deck. Set brakes (if a vehicle) and use wheel
blocks and tie downs for safe transporL
NOTE: Use safety tie downs at front of load. Do not rely on winch
cable alone.
1
D.
Disconnect PTO
Disconnect the power-take-off before engaging the transmission.
Overspeeding 01the pump will greatly shorten Its life or ruin It completely.
C. Operating the Winch
1. Raise the winch control handle to power unreel the cable while
a second person keeps the cable taut.
NOTE: II a one-man operation exists. disengage the spool and unreel
the cable while keeping it taut. Re-engage the spool alter
unreeling and attaching the cable.
NOTE: The winch clutch allows rapid unspooling 01 the cable. from
cable drum. for hooking onto the load. The clutch is operated
by
the shiller lever located on the side of the winch.
NOTE: TO DISENGAGE CLUTCH simply pull out on the
"r
handle
and rotate 90° counter-elockwise and release to lock in the
"OUT" position. The cable may now be free-spooled from the
drum.
Rev. _
•
•
•
2.3
Date _
Eastern Wrecker Sales Inc
To Next Page
Loading...