Mast FenceR
User Manual
Model #04001
Thank you for choosing this product from
JessEm Tool Company. We appreciate your
support and hope that our product serves you
well. This product is designed to provide
many years of reliable service provided it is
used as intended and taken care of.
This user manual will assist you in assembly
and general operation of this product. It is
not our intent to teach you about
woodworking. It is assumed that you are an
experienced woodworker with the basic skills
and experience necessary to use this product
safely. If after reading the following
instructions, if you are unsure or
uncomfortable about safely using this
product we urge you to seek additional
information through widely available
woodworking books or classes.
As part of our Continuous Product
Improvement Policy, JessEm products are
always advancing in design and function.
Therefore there may be differences between
what is shown in our catalogs, website or at
retail display and what is sold at time of
purchase. We reserve the right to make
positive changes to our products at our
discretion.
Suggested Router Bit Speeds
Bit Diameter Max. Speed
1” (25mm) 24,000 RPM
1-1/4” - 2” (30-50mm) 18,000 RPM
2-1/4” - 2-1/2” (55-65mm) 16,000 RPM
3” - 3-1/2” (75-90mm) 12,000 RPM
124 Big Bay Point Road
Barrie, Ontario, L4N 9B4
Canada
866-272-7492 Toll Free
705-726-6145 Local Phone
705-726-6055 Fax
Email: jessem@jessem.com
Website: www.jessem.com
IMPORTANT!
Read and understand the contents of
this manual before assembly or
operation of this product.
WARRANTY LIMITATIONS
This warranty does not cover:
! Repairs or alterations made or attempted by
anyone other than JessEm Tool Company or an
authorized JessEm service professional.
! Normal wear and tear
! Abuse, misuse or neglect.
! Improper care or maintenance.
! Continued use after partial failure.
! Products that have been modified in any way.
! Products used with improper accessories.
! Premature thread wear due to adjusting height
with electric or cordless drill.
JESSEM TOOL LIMITED WARRANTY
All JessEm products are warranted to be free from
defects in material and workmanship. JessEm will
repair or replace any product which upon inspection
proves to be defective for a period of (1) year from
dated receipt and proof of purchase. All warranty
claims should be made direct to JessEm Tool
Company. Contact JessEm for a warranty claim
return authorization and instructions to proceed.
The consumer is responsible for shipping costs to
return product to JessEm Tool Company. We will
repair or replace the product at our discretion and
JessEm Tool will return shipment to you at no
charge.
27610
RTD10000131AA
Note: Rockler may not carry all products and/or sizes listed in this vendor's publication
To Next Page
Need help?
General