1 888 275 4538 MVP GROUP .19 | P a g e
3D – DAILY CLEANNING / END OF WORK
In order to have excellent washing results and a cleaned tank, it is recommended to change the water of the
machine at least twice a day and clean all the filters properly inside the tank. Filters must be removed only
once all the water is drained out of the machine.
3D1 – WATER DRAIN (MECHANICAL MACHINE WITHOUT DRAIN PUMP)
1- Turn OFF the machine by pressing button “H” On/Off.
2- Open the door and remove the stand pipe. (Fig.38)
Fig.38
3- Wait until all the water is completely drained out from the tank.
3D2 – WATER DRAIN (ELECTRONIC MACHINE WITH DRAIN PUMP)
Option not available on this model.
3D3 – WATER DRAIN (MECHANICAL MACHINE WITH DRAIN PUMP )
Option not available on this model.
3D4 – CLEANING THE FILTERS
1- Turn OFF the machine by pressing button “H” On/Off.
2- Manually remove side or central filters or by unscrewing the ferrule located on the top rounded filter
inside the tank. (Fig.43)
To Next Page
Loading...
