Need help?Do you have a question about the Jet-tech EV18 and is the answer not in the manual?
Use suitable means to move the appliance, like lift trucks or fork pallet trucks for safe transportation.
Verify box condition, check machine for damage, and keep packing components away from children.
Dispose of appliance according to WEEE directive and local environmental regulations for proper recycling.
Provides technical specifications including water connection, pressure, flow, hardness, and mineral residues.
Specifies noise level cannot exceed installation standards; machine noise measured below 70dB.
Instructions for connecting the dishwasher to the water supply, ensuring proper pressure and flow.
Details required water supply pressure and recommendations for pressure reducers or pumps.
Guidance on water hardness limits and the recommendation to install a water softener or demineralization filter.
Requirements for drainage lines, sump pits, and connecting to the main drain pipe with a trap.
Instructions for positioning the outlet pipe for models with a drain pump, between 30" and 40" from the floor.
Guidelines for mechanical contact separation, grounding, and safe connection to mains power.
Explains warning messages like ALR1 (Water Fill) and ALR2 (Drain Anomaly) and their causes.
Instructions for operating automatic detergent and rinse aid feeders and their calibration.
Details on setting the rinse aid dispenser quantity by adjusting the needle valve for optimal results.
Periodic maintenance tasks including descaling, cleaning jets, and cleaning solenoid valve filters.
Procedure for taking the machine out of operation, including draining and cleaning components.
General advice for safe operation, usage, and warranty terms, including safety warnings.
Recommendations for initial cycles, loading practices, and using detergents for optimal performance.
Guidelines for properly loading plates, glasses, bowls, and cutlery into the dishwasher racks.
Overview of the control panel functions and the process for starting a washing cycle.
Step-by-step guide to starting the dishwasher, including water supply and power activation.
Description of the washing cycle composition and how to initiate it, including indicator lights.
Procedure for initiating an automatic washing cycle on hoodtype machines by simply closing the door.
Instructions for daily cleaning tasks, including changing water and cleaning filters for optimal results.
Steps to drain water for models without a drain pump, involving opening the door and removing the water flow device.
Procedure for draining water on models with a drain pump, utilizing button 'B' to start the process.
Instructions for turning off the machine, removing, washing, and repositioning filters and overflow components.
Guidelines for cleaning external surfaces using mild soap, avoiding abrasive materials and high-pressure jets.
Steps for safely turning off the machine, including draining the tank and disconnecting power at the mains.
Explanation of warning messages like ALR1 (Water Fill) and ALR2 (Drain Anomaly) and actions to resolve them.
Troubleshooting steps for when the dishwasher fails to operate, checking water supply, electrical connection, and door closure.
Steps to address washing performance issues, checking filters, jets, detergent, and loading.
Troubleshooting for poor rinsing, checking rinse jets, solenoid valve filter, and water pressure.
Guidance on resolving drying issues, verifying rinse aid dosing, container level, quality, and temperature.
Tips for reducing condensation on glasses, checking rinse aid and removing racks promptly.
Recommendation to use only non-foaming products for professional dishwashers to prevent stains.
Troubleshooting steps for excessive foam, checking water temperature, cleaners, and detergent type.
Advice to consult the supplier for verifying rinse aid dosing instructions to resolve smears or spots.
General| Brand | Jet-tech |
|---|---|
| Model | EV18 |
| Category | Dishwasher |
| Language | English |
To Next Page
