7
Base and Column:
Base size ......................................................................................................... 20” L x 12-5/8” W (508 x 320 mm)
Base working surface .................................................................................... 8-1/2” L x 10-1/2” W (216 x 267 mm)
Base slots (2) ............................................................................................................ 5/8” W x 7” L (15 x 178 mm)
Distance between base slots (centers) ......................................................................................... 5-1/8” (130 mm)
Column diameter ......................................................................................................................... 3-5/32” (80 mm)
Dimensions and Weights:
Overall dimensions, assembled .................................................. 28-1/2” L x 19” W x 65” H (724 x 483 x 1650 mm)
Shipping dimensions ............................................................ 56” L x 23-1/2” W x 11-1/2” H (1422 x 597 x 292 mm)
Net weight (approximate) ................................................................................................................. 187 lb (85kg)
Shipping weight (approximate) ......................................................................................................... 198 lb (90kg)
L = length; W = width; H= height
5.1 Base mounting holes for JDP-17
Figure 3: Base mounting holes
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
To Next Page
Loading...
