Need help?Do you have a question about the Jet JML-1014I and is the answer not in the manual?
Outlines the duration of limited warranties for various product categories and conditions.
Explains the process for returning products for inspection, repair, or replacement.
Lists essential safety rules including wearing eye protection, keeping work areas clean, and proper apparel.
Advises on risks from dust exposure, operating while impaired, and safe cleaning procedures.
Explains the importance of grounding, proper plug connection, and use of extension cords.
Begins the procedure for changing spindle speeds by adjusting belt tension and pulley selection.
Completes the process for changing spindle speeds, including belt alignment and tensioning.
Provides step-by-step instructions for removing and installing a new drive belt.
Details cleaning procedures for dust accumulation and protecting the bed surface with wax.
Shows the electrical schematic for the JWL-1220, illustrating motor and lamp connections.
To Next Page
General
