EasyManua.ls Logo

Jet JWL-1642EVS User Manual

Jet JWL-1642EVS
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating Instructions and Parts Manual
Wood Lathe
Models: JWL-1642EVS and JWL-1642EVS-2
WMH Tool Group
2420 Vantage Drive
Elgin, Illinois 60124
Part Number: M-708359
Phone: 800-274-6848 Revision B1 1/07
www.wmhtoolgroup.com
Copyright © WMH Tool Group

Other manuals for Jet JWL-1642EVS

Questions and Answers:

Jet JWL-1642EVS Specifications

General IconGeneral
Swing Over Bed16 inches
Swing Over Cross Slide9.5 inches
Distance Between Centers42 inches
Motor Power2 HP
Spindle Bore1.5 inches
Spindle Speed Range40 - 3, 000 RPM
Tailstock TaperMT-2

Summary

Warranty and Service Information

Warranty Coverage Details

Details warranty coverage for defects in workmanship or materials, excluding consumables.

Warranty Recipient

Specifies that the warranty applies only to the initial purchaser of the product.

Warranty Duration

States that the warranty period is as specified in the product literature for each product.

Warranty Exclusions

Lists exclusions from warranty, including misuse, abuse, accidents, wear, and improper maintenance.

Service Request Procedure

Provides instructions for obtaining service by returning the product to a designated location.

State Law Rights

Explains that the warranty grants specific legal rights that may vary by state.

Warranty Limitations and Disclaimers

Outlines limitations on implied warranties, liability for damages, and potential specification changes.

Comprehensive Safety Warnings

Electrical Hookup and Grounding

115 Volt Operation Guide

Instructions for connecting the 115V model, including proper grounding and extension cord usage.

230 Volt Operation Guide

Guidelines for connecting the 230V model, emphasizing proper plug and grounded receptacle usage.

Manual Introduction and Overview

Technical Specifications Overview

Shipping, Unpacking, and Assembly

Shipping Container Contents

Lists all components included in the lathe's shipping package for verification.

Unpacking and Initial Cleaning

Steps for safely removing the lathe from its packaging and initial cleaning.

Main Assembly Steps

Guidance on assembling the main components of the wood lathe, such as securing the tool rest.

Lathe Assembly Enhancements

Optional Stand Shelf Installation

Instructions on how to build and install an optional shelf between the lathe legs for storage.

Tool Basket Mounting Procedure

Steps for mounting the tool basket bracket and arm to the lathe leg.

Lathe Guards and Controls

Guard Installation and Function

Instructions for attaching and securing the lathe's guard assembly.

Headstock Controls and Features

Detailed description of headstock controls like lock handle, spindle lock, on/off button, and RPM adjustments.

Lathe Control Interfaces

Indexing and Tool Rest Operation

Covers headstock indexing hole, tool rest locking, and tailstock controls for precise operation.

Tailstock Mechanism Details

Details on tailstock lock handle, quill lock, handwheel, and live center for workpiece support.

Speed Settings and Turning Tools

Adjusting Spindle Speed

Steps for adjusting the lathe's speed ranges for different turning operations.

Common Woodturning Tools

Introduction to common woodturning tools like gouges, scrapers, and parting tools for various cuts.

Workpiece Mounting Between Centers

Wood Preparation and Roughing

Selecting Suitable Wood Stock

Guidance on choosing suitable wood for spindle turning, emphasizing grain and defects.

Roughing Out Process

Instructions on the initial shaping of wood stock into a cylinder using a roughing gouge.

Executing Basic Turning Cuts

Cove and 'V' Cut Techniques

Techniques for cutting cove shapes and 'V' cuts using spindle gouges and skew tools.

Parting and Bead Creation

Methods for using the parting tool and skew/spindle gouge to create beads and part off stock.

Finishing Turned Workpieces

Sanding and Applying Finishes

Procedures for sanding and applying finishes to turned pieces for a smooth, professional look.

Faceplate Workpiece Mounting

Steps for attaching a workpiece to the faceplate for bowl and plate turning.

Bowl Turning Fundamentals

Faceplate or Chuck Selection

Comparison of faceplates and chucks for holding workpieces, and choosing the right one.

Wood Selection and Defect Handling

Advice on selecting wood and handling defects like checks, cracks, and distortion for bowls.

Key Tools for Bowl Turning

Identification of key tools for bowl turning, such as bowl gouges and scrapers.

Shaping the Bowl Exterior

Interior Bowl Shaping and Finishing

Hollowing the Bowl Interior

Instructions for hollowing out the inside of a bowl using bowl gouges and scrapers.

Interior Sanding and Separation

Methods for sanding the interior, creating a separation cut, and applying finishes.

Lathe Adjustments and Servicing

Clamping Mechanism Fine-Tuning

Procedure for adjusting the clamping mechanism if needed, ensuring secure locking of components.

Belt and Bearing Replacement

Guidance on replacing the poly-V belt and bearings, recommending professional service.

Troubleshooting Lathe Problems

Stand and Bed Assembly Parts List

Headstock Assembly Parts List

Headstock Assembly Parts List (Continued)

JWL-1642EVS Wiring Schematic

JWL-1642EVS-2 Wiring Schematic

Indexer Operation and Positions

Manual Notes and Reminders

Related product manuals