Jet JWL-1220VS User Manual

JET JWL-1220VS Variable Speed Lathe
Our JET mini lathes set the industry standard for years.
Now, the new JET JWL-1220VS lathe brings variable
speed to this instantly popular machine. Add the JWL-
1220BE 28” bed extension and the JET JWL-1220VS
50” between centers capacity rivals that of many
larger, more expensive lathes.
The JET JWL-1220VS lathes are built using our time
honored heavy cast iron technology to insure
maximum accuracy and the long-term durability that makes the JET JWL-1220VS Wood
Lathe an even greater value.
Power and Speeds
The JET JWL-1220VS lathe features a
3/4HP motor (115V only) that runs
strong, smooth and consistent. Mounted
directly below the bed, the motor is out of
the way yet easily accessible from the
front for belt tensioning. Tool-free levers
on the front of the JET JWL-1220VS
Wood Lathe make adjusting belt tension quick and easy.
The JWL-1220VS uses a sophisticated electronic speed
control along with finely machined six step pulleys that
together provide total spindle RPM control within a huge
overall speed range of 200 to 4300 RPM! The electronic
speed control dial has 5 numerical dial settings which allow
making very specific RPM settings easy. Pulley position #1
is the largest diameter step on the spindle shaft, #6 the
smallest diameter step. Using the chart above (included on
the machine) one can set the speed as desired.
Changing the belt position on the JET JWL-1220VS Wood
Lathe step pulleys is fast and tool-free. Release the belt
tension using the front-mounted levers and then slip the
The JET JWL-1220VS brings the
versatility of variable speed to this very
popular lathe.
Pulley Position
Low Mid High
1 / 2 3 / 4 5 / 6
1 200/330 500/760 1100/1800
2 270/450 700/1000 1500/2400
3 340/560 900/1300 2000/3000
4 410/680 1000/1600 2300/3600
Speed
5 470/800 1200/1800 2700/4300
The variable speed controls are
powerful but simple to operate.

Jet JWL-1220VS Specifications

General

Spindle Speed	60 - 3600 RPM
Spindle Taper	MT2
Motor Power	1 HP
Weight	120 lbs
Tailstock Taper	MT2
Spindle Speed Range	60 - 3600 RPM
Voltage	110V/220V
Swing Over Bed	12 in
Distance Between Centers	20 in
Motor	1 HP, 110V/220V, Single Phase

Summary

Power and Speeds

Motor and Belt Tensioning

Details the 3/4HP motor and tool-free levers for belt tensioning and adjustment.

Indexing and Spindle Lock

24-Position Indexing

Enables precise fluting and drilling operations with consistent spacing.

Spindle Lock Mechanism

Allows manual locking for accessory removal or screwed-in locking for operations.

Versatility and Compatibility

Accessory Compatibility

Designed for common accessories with #2 Morse taper and 1 X 8 threads.

Included Accessories Overview

Lists standard items like spur drive, live center, tool rests, and faceplate.

Bed Extension

JWL-1220BE 28" Bed Extension

Expands capacity to nearly 50" between centers, rivaling larger lathes.

Installation Features

Includes hanging plate and socket screws for easier alignment and stability.

Adjustable Stand

JWL-1220S Stand Features

Offers a rock-solid, stand-alone machine with adjustable leveling feet.

Spindle Height Adjustment

Mounting plates allow spindle height to be set between 43 and 45 inches.

Stand Extension Kit

JWL1220SE Stand Extension

Enlarges the JWL-1220S stand to accommodate the bed extension.