Jet SPACE BALLZ - Page 32

Check Box When This Step is Complete
Installing the second vertical ball riser
Check Box When This Step is Complete
Step # 11-C
Installing the second vertical ball riser
Use the provided tool to tighten the four bolts by turning it
clockwise.
1) Hold the second stage ball riser in one hand and a few of the
securing bolts in your other hand. While looking into the rear of the
cabinet - insert the ball riser and look upwards.
2) Insert one of the bolts with your other hand into one of the four
holes in the exterior part of Section # 3.
WARNING
BE SURE TO HAVE A GOOD GRIP ON THE RISER -
DROPPING IN INSIDE THE CABINET WILL DAMAGE IT
AND ELECTRICAL CONNECTIONS WITHIN THE GAME
Step # 11-A
Installing the second vertical ball riser
Remove the 4 bolts stored in the ball riser.
NOTICE
BOLTS, WASHERS, AND LOCK WASHERS MAY BE
STORED IN SPARE PARTS BOX
Check Box When This Step is Complete
Step # 11-B
INSTALLATION INSTRUCTIONS
Jennison Entertainment Technologies Space Ballz Service Manual Page 32