Jetfire E3 - Operating Instructions (Mod. 10;15;22;30 kW)

11
Warning
in heating mode, the fan starts while the
heating elements heat up.
To turn off the machine:
• Turn the knob (1) on the room thermostat to the
minimum temperature: the heating elements turn off
and the fan continues running.
• Press the button (3): the fan stops immediately.
Warning
starting: the fan starts immediately while the
heating elements heat up gradually.
Shutdown: the fan is turned off only by
pressing the button (3), and only after the
heating elements have cooled down
Warning
this model does not have an automatic power
off cooling ventilation function. Remember,
wait for the residual heat accumulated by the
heating elements to dissipate before
completely turning off and removing the unit
or before setting any objects nearby.
Operating instructions
Mod. 10 kw / 15 kw / 22 kw / 30 kw
• Heating mode
Start
To start operation:
• Turn the knob (3) until it reaches position a for heating
to minimum power or position b for heating to
maximum power — the fan starts running
immediately.
a b
• Turn the knob (1) on the room thermostat to the
desired temperature: the electric heaters also start
and continue running until the set temperature has
been reached while the lamp (5) lights up
Shutdown
To stop operation and turn off the machine:
• Turn the knob (1) on the room thermostat to the
minimum temperature: the heating elements shut
down and the fan continues running while the lamp
(5) goes off.
• Turn the knob (3) until it reaches position d for
complete shutdown: the fan runs until the heating
elements have cooled down completely and then it
stops.
D
Warning
This model has an automatic power off
cooling ventilation function.
Starting: the fan starts immediately while the
heating elements heat up gradually.
Shutdown: after turning the switch (3) to
position d, the fan shuts down only when the
heating elements have cooled down
sufficiently.
Warning
however, wait until the residual heat
accumulated by the heating elements has
been completely dissipated before shutting
down and removing the unit or before setting
any objects nearby.
• Ventilation mode (without heating)
Start
To start operation, turn the knob (3) on the main switch
until it reaches position c.
C