12
Shutdown
To stop operation and shut down the machine, turn the
knob (3) on the main switch until it reaches position a.
D
Safety thermostat manual reset
A temperature-limit thermostat will stop power feeding in
case of overheating. If the thermostat releases,
disconnect fan electricity, wait until the fan has cooled and
fix the problem causing overheating.
To reset the temperature-limit thermostat, remove the
cover and press the switch (2).
Maintenance
Warning
before carrying out any maintenance
operation you must:
• stop the heater;
• turn off the disconnecting switch on the
electric switchboard;
• wait until the heater has cooled down.
Cleaning
For the heater to operate efficiently, cleaning operations
must be carried out regularly. Dust and dirt may result in
overheating and fire.
Disposal
At the end of its useful life, you have to scrap and dispose
of this product by taking it to a local differentiated waste
collection center in conformity to law.
Before scrapping the unit, check the machine data plate:
if it bears the symbol, it means that disposal is regulated
by the Italian legislative decree 151 of 25/07/2005 and
directive 2002/96/ec on waste electrical and electronic
equipment (waee).
The user must inquire about the local electrical and
electronic waste collection system and follow its
instructions.
Illegal disposal of this product with normal domestic waste
can seriously harm the environment and health and is
subject to administrative penalties.
OBSERVED FAULTS, POSSIBLE CAUSES AND
REMEDIES
To Next Page
Loading...