computer radio control system
Receiver with the PPM output
- possibility to select PPM pos./neg.
- PPM output can be selected on E1 or E2 output
Receiver with the PPM output in the function of
backup receiver
- PPM output can be selected on E1 or E2 output
- no output repetition or fail safe is carried out. Every time the
receiver gets the data packet, output impulses and PPM burst
are generated once maximally
- if the data from the transmitter is not available for the receiver, all
the outputs are in Out-Off mode
Receiver with the EX Bus output
- suitable especially for connection to JETI model devices (such as
Central Box)
- EX Bus can be selected on E1 or E2 output
21
®
User ManualUser ManualUser Manual
EN
Receivers REXReceivers REX
FW 1.00FW 1.00
Receivers REX
FW 1.00
COMPLEX RADIO CONTROL SYSTEM
To Next Page
Loading...
Need help?
General
