Jetmaster 700 User Manual

INSTALLATION AND OWNERS MANUAL
DOUBLE SIDED UNITS
OPEN FIREPLACES
INSTALLATIONS TO COMPLY WITH
AS/NZS2918:2018 AND WILL REQUIRE A
BUILDING CONSENT
IMPORTANT: Read all instructions carefully before starting installation. Failure to follow these
instructions may result in a re hazard and will void the warranty.
WARNING
Fire Risk.
For use with solid wood fuel only.
Other fuels may over re and generate poisonous
gases (i.e. carbon monoxide).
• Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or
any other appliance.
• Do not over re - If appliance or chimney connector glows, you are over ring. Over ring will
void your warranty.
• Comply with all minimum clearances to combustibles as specied. Failure to comply may
cause a house re.
If the information in these instructions is not followed exactly, a re could result causing
property damage, personal injury, or death.
!
WARNING

Jetmaster 700 Specifications

General

Brand	Jetmaster
Model	700
Category	Indoor Fireplace
Language	English

Summary

Getting Started

Design and Installation Considerations

Key factors for appliance installation including safety, convenience, traffic flow, and chimney requirements.

Fire Safety

Essential fire safety measures such as smoke detectors, fire extinguishers, CO detectors, and evacuation plans.

Negative Pressure

Understanding negative pressure risks and causes, which can lead to spillage of combustion fumes.

Tools And Supplies Needed

List of necessary tools and building supplies required for appliance installation.

Inspection of Appliance and Components

Procedure for inspecting appliance and components for damage before installation.

Components and Specifications

Optional 70mm Surround

Instructions for installing the optional 70mm surround before final unit positioning.

Bird Cowl

Details on bird cowl usage for solid fuel applications to prevent downdraft.

Logpan

Information regarding the logpan component and its specifications.

Firescreen - Optional

Specifications for the optional firescreen component.

Clearance Requirements

1050 DSU Unit - Hearth

Specifies minimum hearth dimensions and floor protector requirements for the 1050 DSU unit.

700 DSU Unit - Hearth

Specifies minimum hearth dimensions and floor protector requirements for the 700 DSU unit.

Flue & Chimney Requirements

Minimum Height of Flue System Exit

Guidance on minimum flue system height for solid fuel installations as per AS/NZS 2918.

Existing Chimneys

Requirements for inspecting and cleaning existing chimneys prior to installation.

Single Skin Flue

Enclosure requirements for single skin flues within brickwork or concrete.

Twin Skin Flues

Clearance requirements for twin skin flues, whether exposed or enclosed.

Cowl

Types of cowls recommended for solid fuel and gas applications.

General Use

Attaching Optional Fire Screen

Instructions on how to attach and remove the optional firescreen.

General Usage Information

Tips for achieving optimum heat output and fuel economy with your fireplace.

Lighting a Fire

Step-by-step guide on how to light and manage a fire for efficient operation.

Fuels

Guidance on selecting and using appropriate firewood for optimal performance.

Cleaning

Recommendations for cleaning the log pan and maintaining an ash bed.

General Maintenance

Advice on cleaning visible parts and repainting the Jetmaster unit.

Safety

Important safety precautions, including never leaving an open fire unguarded.

AS/NZS 2918 General Notes

Compliance notes and warnings regarding installation and modification according to AS/NZS 2918.