LOCKING MAGNET
(BACK SIDE OF WHEEL)
3. AT THE HINGE POINT, PIVOT THE FRONT OF THE BIKE AROUND TO THE LEFT UNTIL THE FRONT WHEEL IS NEXT TO THE
REAR WHEEL, AND THE MAGNETS ON THE TWO WHEELS ARE ALIGNED.
4. PUSH THE TWO WHEELS TOGETHER SO THAT THE MAGNETS CONNECT, SECURING THE BIKE IN THE FOLDED POSITION.
NOTE: WHEN FOLDED, THE BIKE CAN BE PROPPED UPRIGHT ON THE BIKE STAND.
BIKE STAND
To Next Page
Loading...
