1.3 Assembling the Handlebar
HANDLEBAR HANDLEBAR
DEPENDENT ON THE DATE OF PRODUCTION OF YOUR HEX, YOUR HANDLEBAR WILL NEED TO BE ASSEMBLED ONE OF TWO
WAYS. MATCH YOUR HANDLEBAR TO THE ONE BELOW, THEN FOLLOW THE CORRESPONDING INSTRUCTIONS.
UNFOLD THE SCOOTER SO THAT THE STEM IS UPRIGHT (SEE SECTION 1.2) AND PROP THE SCOOTER ONTO ITS KICKSTAND
(SEE SECTION 2.3) PRIOR TO BEGINNING ASSEMBLY.
FOLLOW ASSEMBLY INSTRUCTIONS BEGINNING ON PAGE 17. FOLLOW ASSEMBLY INSTRUCTIONS BEGINNING ON PAGE 20.
A
A
B
B
To Next Page
Loading...
