Jetson Hex - Adjusting the Height of the Handlebar

24
1.3 Adjusting the Height of the Handlebar
1. OPEN THE STEM CLAMP LATCH.
2. LOOSEN THE BOLT OPPOSITE THE LATCH BY
TURNING IT COUNTERCLOCKWISE WITH THE
4MM ALLEN KEY.
STEM CLAMP LATCH
4MM ALLEN KEY TIP BOLT
TROUBLESHOOTING: IF YOU CANNOT OPEN
OR CLOSE THE LATCH, THE BOLT ON THE
CLAMP MAY BE TOO TIGHT. LOOSEN THE
BOLT ½ ROTATION AT A TIME UNTIL YOU
CAN UTILIZE THE LATCH.