Jetson Hex - Helmet Safety

18
BOLT
CLAMP TOP
HANDLEBAR
CLAMP BASE
A
2. POSITION THE HANDLEBAR ON THE CLAMP BASE. ALIGN THE HOLES IN THE TOP OF THE HANDLEBAR CLAMP AND THE
HANDLEBAR WITH THE PRE-DRILLED HOLES IN THE BOTTOM OF THE HANDLEBAR CLAMP.
3. INSERT THE BOLTS THROUGH THE TOP OF THE HANDLEBAR CLAMP, HANDLEBAR, AND THE BOTTOM OF THE HANDLEBAR
CLAMP BY TURNING EACH ONE CLOCKWISE WITH THE ALLEN KEY.
A
A
A