Jetson JETKART 2.0 User Manual

7
7. Hook one end of the velcro strap to the front of the bracket at the base. Then pull the strap
underneath the hoverboard and attach the other end of the velcro strap to the back of the bracket
at the base. Pull the strap ensuring it is as tight and secure around the hoverboard as possible.
Repeat this step with the other bracket, making sure that both velcro straps are securely connected
to the brackets and snug around the bottom of the hoverboard.
GETTING ON THE JETKART 2.0
1. Before taking your seat, make sure your hoverboard is charged. Then place it on a leveled
surface, facing up and turned off.
2. Carefully lower yourself into the seat. Then place your feet, rst one then the other, on
the footrests. That way your weight can balance out the JetKart 2.0 and keep you from falling
backwards.
3. Once you’re seated, look down and make sure the hoverboard is horizontal and facing
up. After you’ve followed all these steps, you can turn on the hoverboard. (Please note: if the
hoverboard is not horizontal, and you turn on the device, it will go forward or backwards
instantly upon turning on.)

Jetson JETKART 2.0 Specifications

General

Brand	Jetson
Model	JETKART 2.0
Category	Scooter
Language	English