2. LOOSEN THE SCREW ABOVE THE REAR AXLE NUT ON EACH
SIDE OF THE BIKE NEXT TO THE ONE SECURING THE REAR
FENDER BRACKET BY TURNING IT COUNTERCLOCKWISE WITH
THE SCREWDRIVER. REMOVE BOTH SCREWS, ALONG WITH THE
WASHERS UNDERNEATH THEM, AND SET THEM ASIDE WITH THE
OTHER HARDWARE.
SCREWDRIVER
SCREW
FENDER BRACE
CARGO RACK
ATTACHMENT HARDWARE
FENDER BRACE HARDWARE
AXLE NUT
WASHER
To Next Page
Loading...
