Jetson Zephyr

20
YOU WILL NEED THE 10MM WRENCH AND PHILLIPS-HEAD SCREWDRIVER.
1. ON THE FRONT BRAKE, LOCATE THE BOLT ON THE BACKSIDE OF THE BRAKE LEVER. HOLD IT STEADY WITH YOUR
FINGERS OR THE PHILLIPSHEAD SCREWDRIVER WHILE YOU LOOSEN BUT DO NOT REMOVE THE NUT ON THE
FRONT SIDE BY TURNING IT COUNTERCLOCKWISE WITH THE 10MM WRENCH FOR 2  3 ROTATIONS.
1.4 Adjusting the Brakes
BRAKE LEVER
BRAKE LEVER
BRAKE CABLE
NUT
FRONT FORK
BRAKE MECHANISM
BRAKE ARM
10 MM
WRENCH