Adding Camera by QR Code Scanning
1. Once the log in is done, go to device list.
2. Click "+" add button on the interface (Figure 3.1).
3. Go to the “QR code” scanning interface (Figure 3.2).
Scan the QR code on the device (Figure 3.2).
ADDING THE DEVICE:
4. Once the camera is added successfully, follow instructions mentioned in
(Figure 3.4).
5. The device doesn't support 5G WiFi, please select 2.4G WiFi network.
6. Click "Next", and choose your home Wi-Fi for the device and click next
(Figure 3.5).
7. Face the QR code 15-25cm away from the lens and wait for the device to
scan.
8. Once the device scanning gets successful, it will give a prompt sound.
When the sound is heard click “hear the prompt tone” option shown in
(Figure 3.6).
Fig 3.1 Fig 3.3
Fig 3.2
Page: 08Email: support@jidetech.com
JIDETECH DOME CAMERA MODEL-P9 USER MANUAL
To Next Page
Loading...
Need help?
General
