Jimi QBIT - Command List

 Command List
 Command can be sent via SMS
Function Command Explanation
Check Status CHECK#
Get device status
Check Position
Status
WHERE#
Get location
detail
Check URL URL#
Get location in
URL
Set SOS number SOS,A,number1,number2,number3#
Set SOS number
as “number1~3”
Set APN APN,name#
Set APN as
‘name’
Voice Monitor MONITOR#
Get monitor call
Recording LY,A#
Start voice
recording for ‘A’
seconds
* No Spaces between commands
* Most command is covered in the ‘Setting’ Page. Contact us to receive a full version
of command list.