EasyManua.ls Logo

Jimi VL512 - User Manual

Jimi VL512
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
LTE Plug-in GNSS Tracker
VL512
Quick Manual V1.1
Read this manual carefully prior to use. No prior notice will be given for any
changes made to the appearance color, or accessories of the product.

Questions and Answers

  • L
    leeelizabethAug 11, 2025
    What to do if my Jimi GPS failed to access the network?
    • S
      Shane LaraAug 11, 2025
      If your Jimi GPS device fails to access the network, consider the following: * Ensure the SIM card is correctly attached. * If the metal side of the SIM card is stained, gently wipe it with a clean cloth. * If the SIM card is damaged or invalid, replace it. * Verify the device is within a GSM service area. * Check that the device is securely connected with the OBD connector of the vehicle.
  • C
    Craig RoseAug 18, 2025
    Why does my Jimi GPS fail to query a location?
    • H
      Holly PadillaAug 18, 2025
      Your Jimi GPS device might fail to query a location for a couple of reasons. First, your SIM card may not have GPRS services activated; contact your network operator to activate them. Second, the device may not be responding to a command. In that case, check the device, ensuring it can access the network and that the SIM card has text services activated.
  • C
    collinschristopherAug 23, 2025
    How to fix Jimi GPS power-on failure?
    • K
      Kathleen SmithAug 23, 2025
      If your Jimi GPS device fails to power on, there are a couple of potential causes. First, the battery might be low, so connect the device to an external power source. If that doesn't work, the SIM card slot may be damaged, and you should contact your dealer for a replacement.
  • V
    vasquezrebeccaAug 29, 2025
    How to improve poor satellite signal on Jimi GPS?
    • R
      Richard StevensonAug 29, 2025
      If your Jimi GPS device has a poor satellite signal, it might be blocked by metal objects. Remove any metal objects away from the device.
  • J
    Jessica BrooksSep 4, 2025
    What to do if the LED is off on my Jimi GPS?
    • S
      Sabrina CaldwellSep 4, 2025
      If the LED on your Jimi GPS device is off, it might be due to poor contact. Check if the device is securely connected to the OBD port of your vehicle.

Jimi VL512 Specifications

General IconGeneral
GPS Sensitivity-165dBm
GPS ChipsetMTK2503
GNSSGPS, GLONASS, BeiDou, Galileo
LBS Accuracy100 m
GSM AntennaBuilt-in
GNSS AntennaBuilt-in
Supported Satellite SystemsGPS, GLONASS, BeiDou, Galileo

Related product manuals