05
3.2 Default conguration settings
4.1 Features
Movement and ignition detection
Device will send a alert notication to the server if one of these
events happen:
・Vehicle keeps moving at speeds above the threshold for a preset
duration.
・Driver steps on the brake or gas pedal hard, corners rapidly.
・The device is plugged or unplugged from the OBDII connector.
・The state of charge of the backup battery of the device is lower than
10%.
・Communication via 4G LTE networks with 2G GSM fallback
・Two complementary positioning systems ensure the locations to be
accurately displayed on cloud platform.
・Receive alerts when any of 4 kinds of dangerous driving behavior is
detected.
・Inconspicuous mic allows for remote monitoring and recording of
ambient sounds around the device
・Instant alerts for atypical events such as collision, overspeed, device
pull-out, low battery, geo-fence entry/exit, etc.
・Simply plug this device into OBD II socket, you don't have to turn to
professionals.
・Vehicle movement will be detected by accelerometer.
・Ignition will be detected by vehicle power voltage between 9 – 36 V.
04/Introduction
To Next Page
Loading...
Need help?
General
