Need help?Do you have a question about the Jimi JV200 and is the answer not in the manual?
General| GSM Frequency | 850/900/1800/1900MHz |
|---|---|
| Acquisition sensitivity | -148dBm |
| GPRS | Class 12 |
| GPS Chipset | MTK |
| Working temperature | -20℃～ +70℃ |
| Working humidity | 5%～95%RH |
| Tracking sensitivity | -165 dBm |
Details the states of the red power indicator: On, Flashing, Off.
Explains the blue GPS indicator states: Searching, Fixed, Off.
Describes the green GSM indicator states: Initializing, Signal Received, Connected, No Signal.
GSM frequencies, GPRS class, GPS sensitivity, accuracy, and TTFF.
Instructions for charging the device, emphasizing covert installation.
Guidelines for installing the device, ensuring proper GSM/GPS antenna reception.
Command format (SOS,A,...) to add SOS numbers for alerts and monitoring.
SMS command format (APN,...) to configure APN for connecting to the default platform.
SMS command format (SERVER,1,...) to connect to alternative platforms.
Command format (CENTER,A,...) to set a center number for cut-off/restore commands.
Get current position (coordinates) or a Google Maps link via SMS commands WHERE# or URL#.
Access the platform website provided by dealers to view vehicle location.
Cut off fuel supply via platform or SMS command RELAY,1# under specific conditions.
Restore fuel supply via platform or SMS command RELAY,0#.
Set up over speed alerts via SMS command SPEED,ON,Time,Speed,Way#.
Guidelines for handling and disposing of batteries and chargers with care.
Use only JIMI-approved accessories to prevent damage or injury.
Information on the proper disposal of the product as Waste Electrical & Electronic Equipment.
To Next Page
