GPRSSET#
Example:GPRSSET#
Reply message:
GPRS:ON //GPRS on/off status//
Currently use APN:CMNET,user,password; //APN setting information//
Server:1,www.gpsluckly.com,88,0; //platform information//
URL:http://maps.google.com/maps?q=; //preset web link setting information //
6. Operation of device
6.1 Power on/ Power off
Power on: Once insert a valid SIM card and connect all the wires, turn on the
device, then Power LED will ash rst, during signal searching process, GSM and
GPS LED will ash. Once GPS LED keeps slow ashing, it means the device has
been located and it starts to work.
Power off: Just turn off the power switch.
The device will begin to upload positioning data to server once inserting a valid
SIM card and power on. During the working time, it can upload data to server
every 10 seconds.
To power on / power off, please remove the back cover rst, refer to 4. Getting Started.
To Next Page
Loading...
