When the alarm is off, sending recover oil commands manually. Device will restore
oil supplying, and vehicle will work normally again.
Platform account password is needed when sending oil cut off command.
2. Via SMS
Only center number can send the command to the device to restore oil.
The format is: RELAY,0#
After the command is carried out, it will receive “Restore fuel supply: Success!”
6.8 Over Speed Alarm
When the car is moving over a limited speed in average in a limited time period,
then the device will send over speed alarm SMS to user.
To turn on the over speed function, please send below SMS command:
SPEED,ON,Time,Limited speed,way of alarm#
Time range(Second): 5-600s (default as 20s).
Limited speed range(km/h): 1-255, default:120.
Way of alarm: 0, GPRS only; 1, SMS+GPRS; default:1.
Example: SPEED,ON,10,120,1#
Means when the car is moving over 120km/h in average in 10 seconds, the device
will send over speed alarm to user.
To Next Page
Loading...
