Jimi JV200 - Advanced SMS Command Settings; Setting the Center Number

Command format:
SERVER,1,domain,Port,0#
Example:
SERVER,1,www.jimishare.com,8841,0#
It will reply “OK” after set successfully.
5.4 Set the center number
If you want to cut off/restore oil by SMS command, you have to set a center
number rstly. Only the center number can send the cut off/restore oil command
to the device. You can set your own mobile number as center number.
The command for setting center number is:
CENTER,A,mobile number#
For example:
CENTER, A,18165542976 #
If set successfully, there is an “OK” reply message.
Only the SOS number can be used to add or delete center number successfully.
There is only one center number can be set.
5.5 GPRS time interval